Designed and manufactured in Saint-Eustache, Quebec, Canada since 1986

Wear and elevated-temperature tooling

Patt Tool steel for extrusion tooling

Patt Tool is designed for elevated-temperature plastics tooling and abrasive service. A carbide-bearing core combines high working hardness with temper resistance, supporting wear inserts, filled-compound tooling and high-temperature extrusion components. Its material-selection profile places temper resistance above H13 with comparable abrasive wear resistance.

Where this grade fits

Wear inserts, filled-compound tooling and extrusion components exposed to elevated temperature and abrasion. Compare the core wear mechanism, operating temperature and surface treatment together.

Published engineering values

Table units
Published engineering values
PropertyPublished engineering values
Core hardness50–57 HRC
Tensile strength1,750–2,070 MPa253.8–300.2 ksi
Charpy V-notch impact6–25 J4.4–18.4 ft·lb

Engineering selection profile against H13

Engineering selection profile against H13
Design priorityPatt ToolH13
Temper resistance95/10090/100
Polishability70/10070/100
Impact resistance45/10070/100
Core abrasive wear65/10065/100
Corrosion resistance45/10010/100
Core load capacity85/10070/100
Galling resistance55/10055/100

Specify the component and its working conditions

Send the drawing, polymer or contact medium, working temperature, loading, wear or corrosion issue, finish and cleaning method. Patt can review the steel, machining and surface-treatment route together.

Discuss a tooling material

Patt Technologies

Articles & case studies

Discuss your project

Tell us what you need.

Send the polymer, throughput and operating conditions, or the drawing and material requirements for your part.

sales@patt-tech.com

+1 (450) 689-2497

Send your requirements and attach a drawing or specification. Our team will review your application.
PDF, DWG, DXF, STEP, IGES, JPG, PNG or ZIP · 15 MB maximum.