H13 plasma nitriding: case depth and hardness
Review the micrographs and 24-point microhardness traverse from the published technical case study.
ExploreBalanced extrusion tooling
PEA balances core strength, corrosion resistance and a fine working finish for extrusion tooling. Its precipitation-hardened stainless core supports dies, breaker plates, filter bodies and precision melt-contact components. Plasma nitriding adds a hard working surface for sliding and polymer-contact wear.
Dies, breaker plates, filter bodies and polished melt-contact components where core strength, corrosion resistance and finish must work together.
| Property | Published engineering values |
|---|---|
| Core hardness | 48–49.5 HRC |
| Tensile strength | 1,700–1,900 MPa246.6–275.6 ksi |
| Charpy V-notch impact | 44 J32.5 ft·lb |
| Design priority | PEA | H13 |
|---|---|---|
| Temper resistance | 60/100 | 90/100 |
| Polishability | 90/100 | 70/100 |
| Impact resistance | 75/100 | 70/100 |
| Core abrasive wear | 60/100 | 65/100 |
| Corrosion resistance | 80/100 | 10/100 |
| Core load capacity | 80/100 | 70/100 |
| Galling resistance | 45/100 | 55/100 |
Send the drawing, polymer or contact medium, working temperature, loading, wear or corrosion issue, finish and cleaning method. Patt can review the steel, machining and surface-treatment route together.
Discuss a tooling materialPatt Technologies
Review the micrographs and 24-point microhardness traverse from the published technical case study.
Explore
See the geometry, installation envelope and material options behind the Patt wave upgrade.
ExploreDiscuss your project
Send the polymer, throughput and operating conditions, or the drawing and material requirements for your part.
sales@patt-tech.com